Industrial Pollution and its Management

Teacher

Dr. Ashish Kumar Sarangi

Category

Core Courses

Course Attendees

Still no participant

Course Reviews

Still no reviews

Course Name : Industrial Pollution and its Management

Code(Credit) : CUTM 1419 (3-1-0)

Course Objectives

  • To create the knowledge among students with respect to the subject and it's possible applicability.

  • To encourage understanding of basic and advanced concepts in Industrial pollution aspects and waste water treatment technologies.

  • To expose the students for different processes used in industries and in research field.

  • To grow skills required in various industries, research labs and in the field of human health.

  • To develop the students to accept the challenges in industrial sectors.

Course Outcomes

COs                   Course outcomes Mapping Cos with POs (High-3, Medium-2, Low-1)
CO1 ·  Knowledge on basic and advanced concepts in Industrial pollution aspects and waste water treatment technologies

 

PO1(3)
CO5 ·   Analytical and Computational Skill PO5(3)
CO7 ·   Environment and Sustainability

 

PO7(2)
CO8 ·   Ethics and Responsibility

 

PO8(1)

Course Content

Module 1: Fundamentals of pollution

1.1 Hazardous Waste Regulations and Hazardous Materials

1.2 Climate change

1.3 Composting

1.4 Conservation

1.5 Air pollution, water pollution, thermal pollution, soil pollution, water pollution control

1.6 Noise pollution

1.7 Ecosystem ecology

Module 2 Water quality standard

2.1 Drinking Water quality standard

2.2 Introduction to Irrigation Water Treatments

2.3 Stream standard and effluent standard

2.4 Characterization of Municipal waste water

Practice 1:

Water analysis-Determination of Chemical parameters

Practice 2:

Water analysis-Determination of Physical parameters

Practice 3:

Turbidity Measurement

Module 3 Methods of treatment of waste water

3.1 water treatment sewage plant, process with primary treatment aeration settling tank to chlorination and filtration

3.2 Learn the basics of water filtration, softening, desalination and disinfection for small to medium sized water supplies.

3.3 Secondary treatment

3.4 Tertiary treatment methods for waste water treatment

Practice 4:

Determination of Dissolved oxygen in water sample

Practice 5:

Determining the chloride content in given water sample using mohr's method

Practice 6:

Analyzing water samples for total phosphorous

Module 4 Air pollution and its Permissible limit

4.1 National Ambient Air Quality Standards for Ozone

4.2 Air Pollution Control Devices

4.3 Measuring Particulate Matter in Air

Module 5 Solid waste disposal and Management

5.1 Industrial Solid waste disposal

5.2 Municipal Solid waste disposal and Management

5.3 Introduction to waste disposal

5.4 Soil Pollution:Fertilizers and Pesticides

5.5 Understanding Water and Waste Management

Module 6 Industrial Waste Water Treatment

6.1 Water and Wastewater Treatment Engineering

6.2 Water Quality Control

6.3 Desalination and Water Purification

6.4 Cellular Garbage Disposal

6.5 Biological Treatment of Wastewater: Activated Sludge Process

6.6 Anaerobic treatment processes

6.7 Bio filters for biological odor control

Module7 Industrial water and air pollution

7.1 Pulp & Paper Industry

7.2 Sugar Industry

7.3 Iron and steel Industry

7.4 Textile Industry

7.5 Coal-based Thermal Power Plants

7.6 Aluminium smelter

7.7 Cement industry

7.8 Batteries industry

Session 5

1.5 Air pollution, water pollution, thermal pollution, soil pollution, water pollution control

Link 1: https://www.youtube.com/watch?v=9w8ExOCX4cU

Session 8

2.1 Drinking Water quality standard

https://www.youtube.com/watch?v=va2APIXN4Yc

Session 9

2.2 Introduction to Irrigation Water Treatments

https://www.youtube.com/watch?v=Q1WzkULnbjw

Session 11

2.4 Characterization of Municipal waste water

https://www.youtube.com/watch?v=RV-OyRTaIOI

Session 12

Practice:1 (2 hrs.)

Water analysis-Determination of Chemical parameters

https://www.youtube.com/watch?v=-qXRAyeAXJc

Session 13

Practice:2 (2 hrs.)

Water analysis-Determination of Physical parameters

https://www.youtube.com/watch?v=ZHYvoSF_BKk

Session 14

Practice:3 (2 hrs.)

Turbidity Measurement

https://www.youtube.com/watch?v=qz8xHQJw6qY

Session 15

3.1 water treatment sewage plant, process with primary treatment aeration settling tank to chlorination and filtration

Link 1: https://www.youtube.com/watch?v=9z14l51ISwg

Session 16

3.2 Learn the basics of water filtration, softening, desalination and disinfection for small to medium sized water supplies: Purification of water

Link 1 https://www.youtube.com/watch?v=c40yPpQG8e0

Session 17

Session 18

Practice:4 (2 hrs.)

Determination of Dissolved oxygen in water sample

https://www.youtube.com/watch?v=Rf7ByPaUmuM

Session 19

Practice:5 (2 hrs.)

Determining the chloride content in given water sample using mohr's method

https://www.youtube.com/watch?v=Set3XdRshGo

Session 20

Practice:6 (2 hrs.)

Analyzing water samples for total phosphorous

https://www.youtube.com/watch?v=jYZ6uyo7rrc

Session 23

Session 26

Session 27

5.5 Understanding Water and Waste Management

Link 1: https://www.youtube.com/watch?v=NBEYUxI3DuQ

Session 31

6.5 Biological Treatment of Wastewater: Activated Sludge Process

Link 1: https://www.youtube.com/watch?v=6nM1bShwRNw

Link 2: 4-150828043510-lva1-app6892

 

6.6 Anaerobic treatment processes

https://www.youtube.com/watch?v=vclq24V_lrQ

Session 32

6.7 Bio filters for biological odor control

https://www.youtube.com/watch?v=6EWKyuRwUZ0

Case Studies

Case Studies

Our Main Teachers

Dr. Ashish Kumar Sarangi is currently working as Assistant Professor (Chemistry), School of Applied Science, Centurion University of Technology and Management, Balangir. He has received his Ph.D. in Chemistry in the year 2010 from Sambalpur University, Odisha, India. He has received PDF in Computational Chemistry in the year of 2012 from IIT, Bombay. He has […]